High pressure Anti drip Misting nozzles function in cooling by atomizing pressurized water into aerosol particles that “flash-evaporate”. The smaller the water droplets, the better the cooling. the throw of mist nozzles can go up to 2 to 3 meters.
Higher the pressure, fine mist is produced High Pressure Mist Nozzle with a wide range of orifice from 0.10mm, 0.15mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm, 0.60 mm These cleanable Anti-Drip nozzles provide long-lasting performance for a variety of applications with corrosive and higher viscosity liquids. Most common uses include mid/high pressure misting systems, mosquito/insect control systems, odor control, and special effects.
Misting System Nozzles Characteristics: Cleanable Stainless Steel Orifice Fine Atomization 3/16 Thread Stainless Steel Body Built in Anti-Drip Feature High Pressure springs need 250 psi to open / Low pressure springs need 65 psi to open 100 psi is recommended. Specify what springs you need. Note: Low pressure springs performance may vary. These nozzles will work with no springs as well. The .012″/.30mm nozzle is the medium-sized standard nozzle orifice.
At 1,000 psi, the mean diameter of the droplets from this size orifice are 13.1μ with droplets ranging from 1.6μ to 39.1μ with a spray diameter of between 65 degrees and 75 degrees. The .012″/.30mm misting nozzle is ideal for applications requiring moderate flow with small droplet size. It has a similar performance to the .008″/.20mm orifice nozzle with an increased flow rate. It is most commonly used for outdoor cooling odor/dust control applications. This nozzle can be used with any pressures.100 psi or more is better.